MAP= Mean Artery Pressure,
It reflects the blood pressure of an artery when an artey expands
to Its maximum capacity when volume of blood come to an artery.
There is a
Slight difference between the actual measured MAP and the calculated
Map : This difference can be a reference for doctors or users.
PP =Pulse Pressure
It is the difference between Systolic and Diastolic BP. Somewhere It carries meaning in relation to arterial stiffness because Pulse Pressure = Cardiac Output x Arterial Stiffness
This unit not only has been designed With Automatic-measurement but
Also optionally with Stethoscope-sounding measurement Function
Which is almost with same measuring process as mercurical sphygmomanometer does except display display with digits.
Stethoscope Measuring Step:
The Signal Sound will display on the screen, standby for sounding mode.
Place the stethoscope chestpiece in the artecubital space below the cuff.
Press M.RECALL button again, the motor will start pumping and inflate to high pressure(around 190 mmHg) then start exhausting at an auto pre-set rate during stethoscope sounding measuring, until the end of the measurement. Meanwhile, use the bell side of a combination Stethoscope for clearest detection of Systolic BP and Diastolic BP.
The motor can be pumped up again by continuously pressing
M.RECALL button button for repeat Stethoscope sounding measurement
Measurement Method: Oscillometric
Measurement Range : Pressure - 20 ~ 280 mmHg
Pulse rate 40 ~ 200 beats/min
Accuracy: Pressure -+-- 3 mmHg
Pulse rate -+-- 5% of reading
Memory: 90 Memories or 6x90 Memoriies
Power Supply: DC 6V, AA 1.5V X 4 batteries
Display: Large Digit LCD
Oper. Temp./ Humidity: +10C to +40C, 40% to 85% RH
Storage Temp./Humidity: -10C to +60C, 10% to 95% RH
Weight of Main Unit: Approx. 650g (ex. batteries)
Certificate
1. FDA 510(K) approval
2. CE 0434 approval
3. RoHs compliance
4. EMC Test Report
5. GMP