HERS® HERS MEDICAL CO., LTD.

Our AUTOMATIC DIGITAL BLOOD PRESSURE MONITOR UPPER ARM TYPE are proudly MADE IN TAIWAN

AUTOMATIC DIGITAL BLOOD PRESSURE MONITOR UPPER ARM TYPE

Available for Both Automatic / Stethoscope measurement (OPTIONAL)

HERS HD-200M

台灣生產商 生產保健用品,醫藥保健產品. 本公司秉持著方便使用，品質穩定，創新求變的原則，開發出智慧型手臂式電子血壓計,產品來因應現在醫療耗材市場的需求，是本公司耗費多年時間的研究及摸索所研發出可媲美外國知名醫療耗材產品且產品的尺寸大小可依各客戶的需求做調整。

各種智慧型手臂式電子血壓計,，也是本公司產品銷售的主力，曾經外銷至國外深受國外醫療界的青睞及肯定，此產品有，造型輕巧，攜帶方便
•　內建Multiuser 6 x 90 組記憶，方便追蹤記憶
•　液晶螢幕顯示，易於讀取

Features:

ACCURACY/MEMORY

2.      Irregular Heartbeat(1 HB) Indicator

3.      Multi-user 6 x 90 Memories FOR RECORD COMPARISON.(Sys. Dia. Pulse. Date/Time Indication)

4.      AC/DC(6v)/ 0.6-1A  Adapter jack(OPTIONAL ACCESSORIES)

5.      PC LINK(USB V1.0 Connector Cable) jack (OPTIONAL ACCESSORIES)

6.      Automatic one-touch measurement.

7.      Automatic Power off Button.

8.      Mean Artery Pressure(MAP- PP) signal showing Function (OPTIONAL)

MAP= Mean Artery Pressure,

It reflects the blood pressure of an artery when an artey expands to Its maximum capacity when volume of blood come to an artery. There is a

Slight difference between the actual measured MAP and the calculated

Map : This difference can be a reference for doctors or users.

PP =Pulse Pressure

It is the difference between Systolic and Diastolic BP. Somewhere It carries meaning in relation to arterial stiffness because Pulse Pressure = Cardiac Output x Arterial Stiffness.

9.      Available for Both Automatic/Stethoscope measurement (OPTIONAL)

10.  Heart Beating signal showing

11.  Heart Beating signal showing Mean is Ready for Stethoscpe-Sounding(Auscultatory) measurement

   Stethoscpe-Sounding measurement: (OPTIONAL)

   This unit not only has been designed With Automatic-measurement but

   Also optionally with “Stethoscope-sounding measurement” Function

   Which is almostwith same measuring process as mercurical sphygmomanometer does except display display with digits.

   Stethoscope Measuring Step:

1.      Continuousy press M.RECALL button for over 5 seconds until “Signal Sound” display on the screen, then release M.RECALL button,

The “Signal Sound” will display on the screen, standby for sounding mode.

2.      Place the stethoscope’s chestpiece in the artecubital space below the cuff.

3.      Press M.RECALL button again, the motor will start pumping and inflate to high pressure(around 190 mmHg) then start exhausting at an auto pre-set rate during stethoscope sounding measuring, until the end of the measurement. Meanwhile, use the bell side of a combination Stethoscope for clearest detection of Systolic BP and Diastolic BP.

The motor can be pumped up again by continuously pressing

M.RECALL button button for repeat Stethoscope sounding measurement.

HOW TO USE IT CORRECTLY:

1.      Face palm upwards, wrap cuff around Upper Arm and fasten properly

2.      Hold the monitor at Heart Level (The Carry Box may be used for support)

3.      Press the START/STOP Button, Your Upper Arm Blood pressure will be measured accurately in half a minutes.

SPECIFICATION:

Measurement Method:  Oscillometric 

Measurement Range : Pressure - 20 ~ 280 mmHg

Pulse rate  40 ~ 200 beats/min

Accuracy:  Pressure -+-- 3 mmHg

Pulse rate -+-- 5% of reading

Memory:  90 Memories or 6x90 Memoriies

Power Supply: DC 6V, AA 1.5V X4 batteries

Display: Large Digit LCD

Oper. Temp./ Humidity: +10C to +40C, 40% to 85% RH

Storage Temp./Humidity: -10C to +60C, 10% to 95% RH

Weight of Main Unit: Approx. 650g (ex. batteries)

 Certificate

1. FDA 510(K) approval

2.  CE 0434 approval

3.  RoHs compliance

4.  EMC Test Report

5.  GMP